Home / Ceramic Coatings / Residential & Commercial
HomeArmor Certified Applicator
Residential & Commercial Ceramic Coatings in Markham
Protect. Preserve. Simplify.
HomeArmor is the residential ceramic coating Markham homeowners and trade partners turn to for stone, tile, appliance, and glass surfaces. A purpose-built ceramic coating system designed for the home, professionally installed on-site across the GTA.
Built for the home, not repurposed from a vehicle. Quoted per project based on surfaces and square footage.
What It Is
Built for the Home, Not Repurposed From a Vehicle
HomeArmor is a purpose-built ceramic coating designed specifically for residential and commercial interior surfaces. Where traditional sealers and rebranded automotive coatings fall short on long-term household use, HomeArmor is engineered from the start for kitchens, bathrooms, glass, and appliances.
Once cured, the coating forms an invisible, solid-state barrier that resists staining, moisture, and everyday wear without changing the look or feel of the surface. It is chemically inert, non-reactive, does not off-gas, and is safe for kitchens and bathrooms after curing.
We are a certified HomeArmor applicator and install across new builds, renovations, and premium upgrades for homeowners and trade partners alike.
At a Glance
HomeArmor System Overview
- Three formulations: Kitchen & Bath, Appliance, Glass
- Cure time around 2.5 hours per surface
- Solid-state and inert once cured
- Safe for food-prep surfaces after curing
- Applied by certified professionals only
The Problem
High-Value Surfaces Deteriorate Faster Than Expected
Natural stone, glass, and modern interior finishes are vulnerable to staining, etching, and wear from daily use. Moisture, food acids, and household cleaners degrade these surfaces over time, often faster than homeowners expect. Traditional sealers fall short on durability, and automotive coatings were never designed for interior conditions.
Stone & Quartz
Etching From Daily Use
Countertops etch from acidic foods, wine, and citrus, as the Natural Stone Institute documents. Mineral hazing builds over time, and once damage starts it accelerates.
Glass
Cloudy Showers & Mirrors
Shower enclosures cloud from mineral deposits, soap residue, and hard water. Cleaning gets harder the longer it goes unaddressed.
Appliances
Fingerprints & Dulling
Stainless steel shows fingerprints constantly. Polished metals dull and oxidize over years of contact with skin oils and cleaners.
HomeArmor was created to address each of these surfaces with its own dedicated formulation, rather than forcing one general-purpose product to do everything.
The HomeArmor System
Three Formulations, One Protection System
Each formulation is engineered for a specific substrate to ensure compatibility and predictable performance. We assess your surfaces and apply the right product for each.
Certified Applicator
HomeArmor
Protect · Preserve · Simplify
HomeArmor Kitchen & Bath
Kitchen & Bath
A durable barrier on stone and tile that resists acidic etching from food, mineral hazing from water, and surface staining. Preserves natural appeal while reducing the need for harsh cleaners.
Compatible Surfaces
- Natural stone: Marble, Soapstone, Quartz, Granite
- Tile and Porcelain
- Corian, Staron, Avonite, HI-MACS
- Formica Solid Surfacing, Mystera
Benefits
- Resistance to staining, water intrusion, and soap residue
- Easier cleaning with reduced chemical dependence
- Preserves surface appearance and original finish
HomeArmor Appliance
Appliance
Bonds with stainless steel and metal appliance surfaces to reduce fingerprints, smudges, and stains. Maintains a clean, uniform appearance and slows oxidation across years of daily contact.
Compatible Surfaces
- Polished and raw stainless steel
- Painted metals
- Brass and chrome
- Suitable for commercial kitchens and residential spaces
Benefits
- Reduces fingerprints and smudging from skin oils
- Protects against oxidation and surface dulling
- Maintains a clean, uniform appearance
HomeArmor Glass
Glass
Chemically bonds to glass to repel mineral deposits, soap scum, and lingering residues. Improves clarity, reduces water spotting, and makes routine cleaning faster across showers, windows, and mirrors.
Designed For
- Shower surrounds and enclosures
- Windows and architectural glass
- Mirrors
- Commercial glass partitions and storefronts
Benefits
- Water and mineral deposit resistance
- Reduced soap buildup and water spotting
- Improved clarity and faster cleaning
All HomeArmor projects are quoted based on surface type, square footage, condition, and access. Trade and contractor pricing is available on request.
Our Process
How HomeArmor Gets Installed
Coating performance starts with proper prep and the right formulation per surface. Most residential applications complete in a single visit.
Surface Assessment & Consultation
We assess the surfaces to be coated, confirm material compatibility, and identify the right HomeArmor formulation for each one. New builds, renovations, and existing finishes are all candidates.
Cleaning & Surface Preparation
Surfaces are thoroughly cleaned and decontaminated. Existing residues, sealers, or films are addressed before application to ensure the coating bonds properly and performs as expected.
Coating Application & Cure
The matched HomeArmor formulation is applied per the manufacturer specifications. Cure time runs around 2.5 hours per surface, after which the coating becomes solid-state and inert.
Walkthrough & Aftercare
We review the finished surfaces with you, explain pH-neutral maintenance, and provide aftercare guidance. Following the maintenance routine is what extends coating performance.
Who It's For
Built for Professionals, Trusted by Homeowners
HomeArmor integrates into new builds, renovations, and premium upgrades. Two paths in, depending on whether you are protecting your own home or specifying for a project.
Homeowners
For the Home You Live In
For homeowners who want their kitchens, bathrooms, and finishes to look new for longer with less effort. HomeArmor reduces routine maintenance, slows surface deterioration, and preserves the look of the materials you chose.
- Stone, quartz, and tile countertops
- Glass shower enclosures and windows
- Stainless steel appliances and fixtures
- Bathroom and high-touch surfaces
Trade Partners
For the Projects You Deliver
For tile and countertop installers, contractors, home builders, interior designers, and renovation professionals. HomeArmor is a premium upgrade that adds project value without added complexity.
- Enhances project value without complicating timelines
- Creates a premium upgrade opportunity for clients
- Reduces post-installation maintenance concerns
- Trade pricing available on request
Safety, Certification & Care
Safe, Certified, and Simple to Maintain
HomeArmor is engineered for residential environments. Once cured, it is chemically inert, does not off-gas, and is safe for kitchens and bathrooms.
Food-Safe
Inert Once Cured
After curing, the coating becomes solid-state, chemically inert, and non-reactive. Safe for food-prep counters, kitchen surfaces, and bathroom areas.
Certified Applicator
Trained for Predictable Results
HomeArmor uses an in-house certification program covering proper preparation, application technique, and performance outcomes. Coating quality depends on the installer.
Easy Maintenance
No Harsh Chemicals Needed
Use pH-neutral, non-abrasive cleaners. Avoid abrasive pads, powders, and strong chemicals. Biodegradable cleaners are recommended.
Other Services
Other Protection We Offer
HomeArmor covers your home and commercial surfaces. We also protect vehicles with a separate, dedicated automotive ceramic coating brand, paint protection film, and vinyl wraps.
Where We Are
Residential Ceramic Coating Markham: On-Site Across the GTA
Residential and commercial HomeArmor projects are installed on-site. Consultations and assessments can take place at the project location or at our Markham studio.
Studio
Evelyn Protective Films & Coatings
Address:
6 Heritage Rd Unit 3
Markham, ON L3P 1M4
Phone: (905) 201-9938
Hours:
Monday to Friday, 8:30 AM to 5:00 PM
Weekends closed, by appointment only
Service Area
Residential & Commercial On-Site
HomeArmor projects are installed on-site at your home or commercial space throughout the GTA. New builds, renovations, and existing surface upgrades welcome.
- Markham, Unionville, Stouffville
- Richmond Hill, Vaughan
- North York, Scarborough
- Pickering, Ajax, Whitby
- Toronto and beyond
FAQ
Frequently Asked HomeArmor Questions
Answers to the questions homeowners and trade partners ask most.
What surfaces can HomeArmor be applied to?
HomeArmor has three formulations covering distinct surface types. Kitchen & Bath bonds with natural stone (marble, soapstone, quartz, granite), tile, porcelain, and solid surfaces (Corian, Staron, Avonite, HI-MACS, Formica Solid Surfacing, Mystera). Appliance bonds with stainless steel, painted metals, brass, and chrome. Glass bonds with shower enclosures, windows, mirrors, and architectural glass.
How long does HomeArmor last?
Longevity depends on the formulation and how the surface is used. HomeArmor Kitchen & Bath delivers up to 2 to 3 years of expected performance. HomeArmor Appliance lasts up to 3 years. HomeArmor Glass lasts 12 to 24 months depending on usage and water conditions. Performance is optimized when the coating is applied by a certified professional and maintained according to guidelines.
Is HomeArmor safe for food-contact surfaces?
Yes. Once cured, HomeArmor becomes solid-state, chemically inert, and non-reactive. It does not off-gas and is safe for use in kitchens, on countertops, and on food-prep surfaces. For commercial food-service applications, follow local health regulations and approved cleaning protocols.
What does HomeArmor cost?
HomeArmor projects are quoted per project based on the surfaces being coated, square footage, surface condition, and access. Pricing varies widely between a single bathroom shower and a full kitchen with multiple surfaces. Request a quote and we will assess your project and provide a detailed scope and price.
How long does the installation take?
Most residential applications complete in a single visit. Cure time runs around 2.5 hours per surface, after which the coating becomes solid-state. We confirm precise timelines after the surface assessment based on the scope of the project.
Can HomeArmor be applied to existing surfaces or only new ones?
Both. HomeArmor integrates into new builds, renovations, and existing surfaces. Existing surfaces need to be properly cleaned and prepared before coating. We assess condition during the consultation and confirm whether prep work is required before the coating step.
Will HomeArmor change the look or texture of my surface?
No. HomeArmor forms an invisible, solid-state barrier without changing the look or feel of the underlying surface. The original colour, texture, and finish are preserved. Some surfaces show a subtle enhancement of natural appeal, but the coating does not add gloss, sheen, or visible film.
How is HomeArmor different from automotive ceramic coatings?
HomeArmor is purpose-built for interior household and commercial surfaces. Automotive ceramic coatings are engineered for vehicle paint exposed to road conditions, UV, and contamination. The chemistries, cure profiles, and expected performance differ. For vehicles, we use GlossTech ProSeries on our automotive ceramic coatings page. Applying an automotive coating to interior household surfaces, or vice versa, does not deliver the expected results.
How do I maintain a HomeArmor-coated surface?
Maintenance is straightforward. Use pH-neutral, non-abrasive cleaners and quality cleaning cloths. Avoid abrasive pads, powders, and strong chemicals that could degrade the coating. Biodegradable cleaners are recommended. We provide a full aftercare guide with every installation.
Do you offer trade pricing for contractors, builders, and designers?
Yes. Trade pricing is available for tile and countertop installers, contractors, home builders, interior designers, and renovation professionals. Reach out with your project details and we will scope it out with the appropriate pricing structure for your role.
Ready to Protect the Surfaces That Matter Most?
Tell us what surfaces you are protecting and what matters most: longevity, easier maintenance, food safety, or premium upgrade value. We will walk you through the right HomeArmor formulation and quote the project.